Clip-In

Lay-In

Lay-On

Semi-Frame

Full-Frame

Design

Open Cell


Clip In Ceiling Systems

Introduction

Clip in ceiling system is one of the most popular metal ceiling system in the market. It is also a specialty of ¡§KMC¡¨ which passes the characteristics of economy, efficiency and attractiveness.

A range of square and rectangular clip in metal ceiling tiles are available for interior and exterior use, it  supplied either plain or in a range of perforation patterns and also finished with a durable, washable electrostatically applied polyester powder finish.

Advantages

  • Quick to install metal ceiling system.
  • Closed butt joints of either bevel or square edges.
  • Concealed suspension system.
  • Total downward demountability.
  • Economical cost effective solution.
  • Excellent sound absorption and attenuation available.

wpeB.jpg (16491 bytes)

Suspension System
  • The Clip-In Suspension system consists of a common runner which is used both as the upper primary grid as well as the lower secondary grid, made by galvanized steel to ensure rigidity.
  • The grid is easily assembled by means of clamp fittings to form a sturdy mounting grid system.
  • The hanger rod is attached with ¡§Ramset¡¨ - Z bracket to the structural slab. Length according to the suspension height. The hanger rod connected with the hanger bracket and splice into C-Channel for a rigid primary grid. Then they slide onto the spring-tee by a galvanized spring-clip to form a sturdy secondary grid.

Accessories

wpeF.jpg (16014 bytes)

Back to Top

Model Reference


Rise Team Engineering Limited 

 Telephone :    (852) 2763 0048      Fax  : (852) 2353 5722
E-Mail       :  rise_team@yahoo.com